Comment Feed for Channel 9 - Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules http://ecn.channel9.msdn.com/o9/previewImages/100/458686_100x75.jpg Channel 9 - Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules In this 4 part series, Bob Brumfield and Erwin van der Valk from patterns and practices shows you how to build a modular application using the recently released Composite Application Guidance for WPF and Silverlight - February 2009 (also known as Prism V2).   Part 1. Creating a shell and modules In this screencast, you will see how to divide an application into modular pieces and how to recombine them again in a shell.For Part 2 of 4: Visual CompositionBob Brumfield and Erwin van der Valk are both Software Development Engineers at Microsoft patterns & practices and have both worked on the Prism V2 project. en Wed, 22 May 2013 01:39:36 GMT Wed, 22 May 2013 01:39:36 GMT Rev9 Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules

posted by vesuvius

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711403570000000 Wed, 25 Feb 2009 06:32:37 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711403570000000 vesuvius Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules You are welcome. I will be posting the other 3 screencasts this week.

posted by akMSFT

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711441590000000 Wed, 25 Feb 2009 07:35:59 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711441590000000 akMSFT Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules posted by DCMonkey

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711551010000000 Wed, 25 Feb 2009 10:38:21 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711551010000000 DCMonkey Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules
I apologize for the audio issue. Working on fixing it right now. I will upload a new file shortly.

thanks

posted by akMSFT

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711811280000000 Wed, 25 Feb 2009 17:52:08 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711811280000000 akMSFT Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules
I am working on getting the video file updated to fix the audio issue. In the meantime, please use the WMV (High) file from here: http://mschnlnine.vo.llnwd.net/d1/ch9/6/8/6/8/5/4/PrismV2Screencast1_2MB_ch9.wmv. The audio quality is much better in this version. Sorry for any inconvenience.

Thanks

posted by akMSFT

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711987700000000 Wed, 25 Feb 2009 22:46:10 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633711987700000000 akMSFT Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules posted by akMSFT

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633712083660000000 Thu, 26 Feb 2009 01:26:06 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633712083660000000 akMSFT Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules
Well done for these screencats. The model is very interesting, but it is a bit complex to understand.
Can you give us your source code after each step.

Thank you P&P team!


posted by DqvY

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633712269290000000 Thu, 26 Feb 2009 06:35:29 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633712269290000000 DqvY Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules

posted by bobbrum

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633713514990000000 Fri, 27 Feb 2009 17:11:39 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633713514990000000 bobbrum Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules final source code for this series to the Codeplex site.

posted by bobbrum

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633713727830000000 Fri, 27 Feb 2009 23:06:23 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633713727830000000 bobbrum Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules Keep the good work

posted by Rachida

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633714715540000000 Sun, 01 Mar 2009 02:32:34 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633714715540000000 Rachida Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules Releasemicrosoft.practices.composite.dll?
What I 'm missing thanks.

posted by Rachida

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633714764470000000 Sun, 01 Mar 2009 03:54:07 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633714764470000000 Rachida Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules
We did not release the Composite Application Library in a binary format, just source, so you'll need to compile them yourself.

-b

posted by bobbrum

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633715275810000000 Sun, 01 Mar 2009 18:06:21 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633715275810000000 bobbrum Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules Thanks for the good work.
Rachida

posted by Rachida

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633715316720000000 Sun, 01 Mar 2009 19:14:32 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633715316720000000 Rachida Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules Hi guys - the high quality links do not work. Could this be fixed? Thanks!

posted by rcbapb

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633814680190000000 Wed, 24 Jun 2009 19:20:19 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633814680190000000 rcbapb Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules At 3:56 how did you make Visual Studio resolve which using reference the UnityBootStrapper class required?

EDIT: Scrap that I found out how do do it. Cheers

posted by brianstewey

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633841167840000000 Sat, 25 Jul 2009 11:06:24 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633841167840000000 brianstewey Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules Awesome tutorials, spend all day finding small bits and pieces untill I stumbled onto this and it put it all together and more.

posted by TomKlein

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633869798310000000 Thu, 27 Aug 2009 14:23:51 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633869798310000000 TomKlein Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules Thanks a lot for posting videos and code.

 

Hi i am working on prism2 and trying to divide shell into region and it working fine with the following code:

Grid >  

<Grid.RowDefinitions>  <RowDefinition Height="Auto"/>    <RowDefinition Height="*"/>  </Grid.RowDefinitions>  

 

 

 <basics:TabControl Regions:RegionManager.RegionName="ResultsRegion" Grid.Row="1" Margin="3"/>

 

But when i want to change these (content or tabcontrols) to canvas ,grid or stackpanel im getting RegionCreationException was unhandled by user code error.

 

Same error when i tried directly to apply Regions to RowDefinition. ERROR::::(RegionCreationException was unhandled by user code)

 

Is there any  conditions to divide shell and assign Control Or Panels to the regions of shell.

Thanks

posted by chinni

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633924479160000000 Thu, 29 Oct 2009 21:18:36 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c633924479160000000 chinni Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules why is the audio/video quality horrible?

posted by al514

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c634011673840000000 Sun, 07 Feb 2010 19:23:04 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c634011673840000000 al514 Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules I am confused as to the last part of the presentation where you used category.TypeOf(DiggModule) and make a reference you say shouldn't really be made?  Demos and training can sometimes be difficult for people who are really trying to make their code better and more flexible by using Dependency Injection and Inversion of Control, etc.  However, then you will see things in demos which completely contradict what you have learned.  Just once, I would like to read an article or see a demo where no compromises are made so I can really see what it's like to follow all of these practices.

 

I understand that sometimes these things are done for various reasons and mean no criticism of your demo.  I just want you to know that for people who are not yet familiar with everything yet, it can be frustrating and confusing since you never get to see an example that is in complete agreement with what is being taught.

Angel

posted by MaidenDotNet

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c634167175880000000 Fri, 06 Aug 2010 18:53:08 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c634167175880000000 MaidenDotNet Re: Creating a modular application using Prism V2 - Screencast 1/4 : Creating a shell and modules None of the videos in this section are working. I am not able to download nor I am able to view them. Please fix it.

posted by HarishSuhanda

]]> http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c634207844150000000 Wed, 22 Sep 2010 20:33:35 GMT http://channel9.msdn.com/Blogs/akMSFT/Creating-a-modular-application-using-Prism-V2-Part-1-of-4--Creating-a-shell-and-modules#c634207844150000000 HarishSuhanda