Summary: Windows PowerShell Language Quick Start. This contains a simple overview of the key parts of the language syntax. This is not meant an alternative to the full product manuals that will no doubt arrive in due course, but is a useful reference if you know what you want to do, but just can't quite remember it! Baby Strollers

The home page for the Channel9 Windows PowerShell Wiki is WindowsPowerShellWiki.

QUICK START

Arithmetic Operators (also see Unary and String operators)

+	addition, concatenation
-	subtraction
*	multiplication, string repetition
/	division
%	modulus

Array Comparison

Return all elements equal to 3:	1,2,3,5,3,2 –eq 3
Return all elements less than 3:	1,2,3,5,3,2 –lt 3
Test if 2 exists:	if (1, 3, 5 –eq 2) …

Other operators: ""-gt, -le, -ge""

Arrays

"a","b","c"	array of strings
1,2,3	array of integers
@()	empty array
@(2) or ,2	array of 1 element
1,(2,3),4	array within array
$a5	sixth element of array*
$a2 3	fourth element of the third element of an array

NB: Arrays are zero-based.

Assignment Operators

=	Assigns a value to a variable
+=	Adds a value to a variable
-=	Subtracts a value from a variable
*=	Multiplies a variable by a value
/=	Divides a variable by a value
%=	Performs a modulus on a variable

Associative Arrays (Hashtables)

$hash = @{ }	Create empty hashtable
$hash.key1 = 1	Assign 1 to key "key1"
$hash.key1	Returns value of key1
$hash"key1"	Returns value of key1
$hash"key1"=2	Assigns 2 to key "key1"
$hash.key1={cmd}	Assign code block to key1
$hash.key1(1,2)	Run code block in key1 with parameters 1,2

Boolean Values

$true = 1 –eq 1	Assigns True to $true
1,2,3 –and $true	true
$() –and $true	false
@() –and $true	false
@(1) –and $true	true
"" –and $true	False
"word" –and $true	True

break (scripting)

The "break" commands exits a loop. Example:

		  while (1)
		  {
		    $a = something
		    if ($a –eq 1) break;
		  }

Command Expansion Operators

$( )	Returns null
$(1)	Returns 1
$(1,2,3)	Returns an array : 1,2,3.
@(get-alias;get-process)	Executes the two commands and returns the results in an array

Comments

		  # This is a comment.
		  $a = "#This is not a comment…"
		  $a = "something" # …but this is.

Comparison Operators

""-band, -bor, -bnot""	bitwise and, bitwise or, bitwise not
""-match,-notmatch""	regex pattern matching
""-like,-notlike""	globbing pattern matching
""-eq, -ne""	Equal, Not equal
""-gt, -ge""	Greater than, greater or equal
""-lt, -le""	Less than, less or equal
""-is""	compare types (1 ""-is"" int)

Case Insensitive variants:
""-imatch, -inotmatch, -ilike, -inotlike, -ieq, -ine, -igt, -ige, -ilt, -ile""

continue (scripting)

The continue statement continues the next iteration of a loop without breaking out of it. Example:

		  while (1)
		  {  
		    $a = something
		    if ($a –eq 1) (continue)
		    # This line is not reached unless $a == 1
		  }
		  #  This line is never reached.

Dot Sourcing

Dot sourcing allows running functions, script blocks, and scripts in the current scope rather than a local one. Example:

		  . [MyFunction]

If MyFunction sets a variable, it is set in the current scope rather than the function’s local scope.

Escape Character and Escape Sequences

The escape character is the backwards apostrophe, or `. To make a character literal, precede it with `. To specify a ` use ``.
Special escape sequences

`0	(null)
`a	(alert)
`b	(backspace)
`f	(form feed)
`n	(new line)
`r	(carriage return)
`t	(tab)
`v	(vertical quote)

Execution Order

Windows PowerShell attempts to resolve commands in the following order: aliases, functions, cmdlets, scripts, executables, normal files

for (scripting)

:label for (initializer; condition; iterator) {}
Example:

		  for ($i = 0; $i –lt 5; $i++) {write-object $i}

foreach (scripting)

:label foreach (identifier in pipeline or collection) {}

Example:

		  $i = 1,2,3
		  foreach ($z in $i) {write-object $z}

functions (scripting)

		  function [MyFunction] {
		    write-object $args[0]
		  }

Filters (scripting)

		  filter [MyFilter] {
		    $_.name
		  }

if/elseif/else (scripting)

		  if (condition) {…}
		  elseif (condition) {…}
		  else {…}

On the command-line, the closing brace must be on the same line as elseif and else. This restriction does not exist for scripts

Invoke Operator

The & operator can be used to invoke the contents of an object. Example:

		  $a = "get-process"
		  &$a
		  $a = { get-process | pick-head 2 }
		  &$a

Logical Operators

! and -not	Not a single value
-and	And two values
-or	Or two values

Method Calls

Methods can be called on objects. Examples:

		  $a = "This is a string"
		  [$a.ToUpper()]
		  [$a.SubString(0,3)]
		  [$a.SubString(0,($a.length/2))]
		  $a.Substring(($a.length/2), ($a.length/3))

Static Methods may not be called
**The above is old. You can call statics easily - aka.

Variables

Variables are case insensitive and case preserving.

$$	contains the last token of last line input into the shell
$?	Contains that success/fail status of the last operation
$^	contains the first token of the last line input into the shell
$DebugPreference	The action to take when data is written via write-debug in a script or WriteDebug in a cmdlet or provider.
$ErrorActionPreference	The action to take when data is written via write-error in a script or WriteError in a cmdlet or provider.
$HistorySize	Number of entries saved in the command history.
$PSCommandPath	The paths where .cmdlet and .cmdletprovider files may be found. This is the Windows PowerShell equivalent of the CMD.EXE $PATH.
$ReportErrorShowExceptionClass	Set to true indicates that the class name of the exception(s) displayed will be shown. Default at internal startup is false.
$ReportErrorShowInnerException	Set to true indicates that the chain of inner exceptions should be shown. Each exception message will be indented from the previous message. The display of each exception is governed by the same options as the root exception, meaning that the options dictated by $ReportShowError* will be used to display each exception. Default is false.
$ReportErrorShowSource	Set to true indicates that the assembly name from whence the exception originated will be displayed. Default at internal startup is true.
$ReportErrorShowStackTrace	Set to true indicates that the stack trace of the exception will be emitted. Default at internal startup is false.
$ShouldProcessPolicy	The action to take when ShouldProcess is used in a cmdlet.
$ShouldProcessReturnPolicy	ShouldProcess will return this setting
$StackTrace	The current execution stacktrace - currently, this may be overwritten.
$VerbosePreference	The action to take when data is written via write-verbose in a script or WriteVerbose in a cmdlet or provider.
$_	The current pipeline object, used in script blocks and where
$Args	Used in creating functions that require parameters
$Error	Objects which had an error occur while processing that object in a cmdlet.
$foreach	Reference to the enumerator in a foreach loop
$Home	The users home directory; set to %HOMEDRIVE%\%HOMEPATH%
$Input	Can aid in code blocks that are in the middle of a pipeline, (see code block)
$PSHome	The install location of Windows PowerShell
$Host	Information about the current executing host
$OFS	Output Field Separator
$StackTrace	contains detailed stack trace information about the last error

Object Properties

An object’s properties can be referenced directly with the "." operator.

		  $a = get-date
		  $a.Date
		  [$a.TimeOfDay.Hours]

Operator Precedence

Operators are evaluated in the following precedence:
() {}, @
""$, !, , ., &, ++ --, Unary + -, * / %, Binary + -, Comparison ""
""Operators, -and –or, |, > >>, =""

Redirection

The > and >> operators redirect command output to files. The > operator creates a new file or truncates and existing one, while the >> operator appends to an existing file. Example:

		  1,2,3 >foo.txt
		  5,6 >>foo.txt

return (scripting)

The return command exits the current script or function and returns a value. Example:

		  function foo {
		    ...
		  }

Script Blocks

Commands and expressions can be stored in a script block object and executed later. Example:

		  $block = {get-process; $a=1}
		  &$block

Scripts

Windows PowerShell commands can be stored in and executed from script files. The file extension for scripts is ".ps1". Parameters can be passed to a script and a script can return a value.
Example:

		  $sum = [MyAdder.ps1] 1 2 3

Strings and String Operators

String constants:

		  "this is a string, this $variable is expanded"
		  ‘this is a string, this $variable is not expanded’

String operators

+	Concatenate two strings
*	Repeat a string some number of times
-f	Format a string
-replace	replace elements in a string

Examples:

		  PS>  "test" + "this"
		  testthis
		  PS>  "{0:M}" -f $(get-date)
		  June 02
		  PS> $a = 1,2,3,4
		  PS> $a
		  1
		  2
		  3
		  4
		  PS> $OFS = ":"
		  PS> "$a"
		  1:2:3:4
		  PS> "This is a test" -replace "is","IS"
		  ThIS IS a test

Switch

		  $a = 3
		  switch ($a)
		  {
		    1 {"got one"}
		    2 {"got two"}
		    3 {"got three"}
		  }

		  $var = "word2"
		  switch -regex ($var)
		  {
		    "word2"  {"Multi-match Exact " + $_ }
		    "word.*" {"Multi-match Exact1 " + $_ }
		    default  {"Multi-match Default " + $_; break}
		    "w.*"	 {"Previous Break terminated the matching"}
		  }

		  $var = "word1","word2","word3"
		  switch -regex ($var)
		  {
		    "word1"  {"Multi-match Exact " + $_ ; continue}
		    "word2"  {"Multi-match Exact " + $_ ; continue}
		    default  {"Multi-match Default " + $_; continue}
		  }

Trap

Execute a block of code in a terminating error condition. Example:

		  function handler1 { write-host "Hi, I'm a trap handler" }
		  function handler2 { write-host "Hi, I'm a trap handler2" }
		  trap [System.Management.Automation.ExecutionFailedException]
		  { handler2 ; continue }
		  trap [System.Management.Automation.ExecutionBreakOnErrorException]
		  { handler1 ; continue }
		  get-content thisisabadfilename -errorp notifystop
		  set-location thisisabadlocation

Unary Operators

""++""	Increment a variable
--	Decrement a variable
+	Indicate that a number is positive
-	Indicate that a number is negative
""typeobject""	cast object to type

		  @$a = [int]"3"@
		  @$a + 3@
		  @6@

Variables

Format: $scope:name
Examples:

		  $a = 1
		  $global:a = 1
		  $local:a = 1
		  $env:path = "d:\windows"

Scope may be either global, local or script

while (scripting)

		  [:label] while (condition)
		  {
		  …
		  }

Summary%3a Windows %5bPowerShell%5d Language Quick Start. This contains a simple overview of the key parts of the language syntax. This is not meant an alternative to the full product manuals that will no doubt arrive in due course%2c but is a useful reference if you know what you want to do%2c but just can%27t quite remember it%21 %5burl%3aBaby Strollers%7chttp%3a//thekiddiesworld.com/strollers/%5d
 
The home page for the Channel9 Windows %5bPowerShell%5d Wiki is %5bWindowsPowerShellWiki.%5d
 
%21 QUICK START
 
%21%21%21 Arithmetic Operators %28also see Unary and String operators%29
%7c%2b 	%7caddition%2c concatenation%7c
%7c-	%7csubtraction%7c
%7c*	%7cmultiplication%2c string repetition%7c
%7c/ 	%7cdivision%7c
%7c%25 	%7cmodulus%7c
 
%21%21%21 Array Comparison
%7cReturn all elements equal to 3%3a%7c1%2c2%2c3%2c5%2c3%2c2 –eq 3%7c
%7cReturn all elements less than 3%3a%7c1%2c2%2c3%2c5%2c3%2c2 –lt 3%7c
%7cTest if 2 exists%3a%7cif %281%2c 3%2c 5 –eq 2%29 …%7c
 
%21%21%21 Other operators%3a  %22%22-gt%2c -le%2c -ge%22%22
 
%21%21%21 Arrays
%7c%22a%22%2c%22b%22%2c%22c%22	%7carray of strings%7c
%7c1%2c2%2c3 	%7carray of integers%7c
%7c@%28%29	%7cempty array%7c
%7c@%282%29 or %2c2%7c	array of 1 element%7c
%7c1%2c%282%2c3%29%2c4%7c	array within array%7c
%7c%24a%5b5%5d	%7csixth element of array*%7c
%7c%24a%5b2%5d%5b3%5d%7c	fourth element of the third element of an array%7c
 
* NB%3a Arrays are zero-based.
 
%21%21%21 Assignment Operators
%7c%3d	%7cAssigns a value to a variable%7c
%7c%2b%3d	%7cAdds a value to a variable%7c
%7c-%3d	%7cSubtracts a value from a variable%7c
%7c*%3d	%7cMultiplies a variable by a value%7c
%7c/%3d	%7cDivides a variable by a value%7c
%7c%25%3d	%7cPerforms a modulus on a variable%7c
 
%21%21%21 Associative Arrays %28Hashtables%29
%7c%24hash %3d @%7b %7d	%7cCreate empty hashtable%7c
%7c%24hash.key1 %3d 1	%7cAssign 1 to key %22key1%22%7c
%7c%24hash.key1	%7cReturns value of key1%7c
%7c%24hash%5b%22key1%22%5d	%7cReturns value of key1%7c
%7c%24hash%5b%22key1%22%5d%3d2	%7cAssigns 2 to key %22key1%22%7c
%7c%24hash.key1%3d%7bcmd%7d	%7cAssign code block to key1%7c
%7c%24hash.key1%281%2c2%29	%7cRun code block in key1 with parameters 1%2c2%7c
 
%21%21%21 Boolean Values
%7c%24true %3d 1 –eq 1	%7cAssigns True to %24true%7c
%7c1%2c2%2c3 –and %24true	%7ctrue%7c
%7c%24%28%29 –and %24true	%7cfalse%7c
%7c@%28%29 –and %24true	%7cfalse%7c
%7c@%281%29 –and %24true	%7ctrue%7c
%7c%22%22 –and %24true	%7cFalse%7c
%7c%22word%22 –and %24true	%7cTrue%7c
 
%21%21%21 break %28scripting%29
The %22break%22 commands exits a loop.  Example%3a
%7b%7b
  while %281%29
  %7b
    %24a %3d something
    if %28%24a –eq 1%29 break%3b
  %7d
%7d%7d
 
%21%21%21 Command Expansion Operators
%7c%24%28 %29	%7cReturns null%7c
%7c%24%281%29	%7cReturns 1%7c
%7c%24%281%2c2%2c3%29	%7cReturns an array %3a 1%2c2%2c3.%7c
%7c@%28get-alias%3bget-process%29	%7cExecutes the two commands and returns the results in an array%7c
 
%21%21%21 Comments
%7b%7b
  %23 This is a comment.
  %24a %3d %22%23This is not a comment…%22
  %24a %3d %22something%22 %23 …but this is.
%7d%7d
 
%21%21%21 Comparison Operators
%7c%22%22-band%2c -bor%2c -bnot%22%22%7cbitwise and%2c bitwise or%2c bitwise not%7c
%7c%22%22-match%2c-notmatch%22%22%7cregex pattern matching%7c
%7c%22%22-like%2c-notlike%22%22%7cglobbing pattern matching%7c
%7c%22%22-eq%2c -ne%22%22%7cEqual%2c Not equal%7c
%7c%22%22-gt%2c -ge%22%22%7cGreater than%2c greater or equal%7c
%7c%22%22-lt%2c -le%22%22%7cLess than%2c less or equal%7c
%7c%22%22-is%22%22%7ccompare types %281 %22%22-is%22%22 %5bint%5d%29%7c
 
Case Insensitive variants%3a
%22%22-imatch%2c -inotmatch%2c -ilike%2c -inotlike%2c -ieq%2c  -ine%2c -igt%2c -ige%2c -ilt%2c -ile%22%22
 
%21%21%21 continue %28scripting%29
The continue statement continues the next iteration of a loop without breaking out of it.  Example%3a
%7b%7b
  while %281%29
  %7b  
    %24a %3d something
    if %28%24a –eq 1%29 %28continue%29
    %23 This line is not reached unless %24a %3d%3d 1
  %7d
  %23  This line is never reached.
%7d%7d
 
%21%21%21 Dot Sourcing
Dot sourcing allows running functions%2c script blocks%2c and scripts in the current scope rather than a local one.  Example%3a
%7b%7b
  . %5bMyFunction%5d
%7d%7d
If %5bMyFunction%5d sets a variable%2c it is set in the current scope rather than the function’s local scope.
 
%21%21%21 Escape Character and Escape Sequences
The escape character is the backwards apostrophe%2c or %60.  To make a  character literal%2c precede it with %60.  To specify a %60 use %60%60. 
Special escape sequences
%7c%600%7c%28null%29%7c
%7c%60a%7c%28alert%29%7c
%7c%60b%7c%28backspace%29%7c
%7c%60f%7c%28form feed%29%7c
%7c%60n%7c%28new line%29%7c
%7c%60r%7c%28carriage return%29%7c
%7c%60t%7c%28tab%29%7c
%7c%60v%7c%28vertical quote%29%7c
 
%21%21%21 Execution Order
Windows %5bPowerShell%5d attempts to resolve commands in the following order%3a  aliases%2c functions%2c cmdlets%2c scripts%2c executables%2c normal files
 
%21%21%21 for %28scripting%29
%5b%3alabel%5d for %28%5binitializer%5d%3b %5bcondition%5d%3b %5biterator%5d%29 %7b%7d
Example%3a
%7b%7b
  for %28%24i %3d 0%3b %24i –lt 5%3b %24i%2b%2b%29 %7bwrite-object %24i%7d
%7d%7d
 
%21%21%21 foreach %28scripting%29
%5b%3alabel%5d foreach %28identifier in pipeline or collection%29 %7b%7d
 
Example%3a
%7b%7b
  %24i %3d 1%2c2%2c3
  foreach %28%24z in %24i%29 %7bwrite-object %24z%7d
%7d%7d
 
%21%21%21 functions %28scripting%29
%7b%7b
  function %5bMyFunction%5d %7b
    write-object %24args%5b0%5d
  %7d
%7d%7d
 
%21%21%21 Filters %28scripting%29
%7b%7b
  filter %5bMyFilter%5d %7b
    %24_.name
  %7d
%7d%7d
 
%21%21%21 if/elseif/else %28scripting%29
%7b%7b
  if %28condition%29 %7b…%7d
  elseif %28condition%29 %7b…%7d
  else %7b…%7d
%7d%7d
 
On the command-line%2c the closing brace must be on the same line as elseif and else.  This restriction does not exist for scripts
 
%21%21%21 Invoke Operator
The %26 operator can be used to invoke the contents of an object.  Example%3a
%7b%7b
  %24a %3d %22get-process%22
  %26%24a
  %24a %3d %7b get-process %7c pick-head 2 %7d
  %26%24a
%7d%7d
 
%21%21%21 Logical Operators
%7c%21 and -not%7cNot a single value%7c
%7c-and%7cAnd two values%7c
%7c-or%7cOr two values%7c
 
%21%21%21 Method Calls
Methods can be called on objects.  Examples%3a
%7b%7b
  %24a %3d %22This is a string%22
  %5b%24a.ToUpper%28%29%5d
  %5b%24a.SubString%280%2c3%29%5d
  %5b%24a.SubString%280%2c%28%24a.length/2%29%29%5d
  %24a.Substring%28%28%24a.length/2%29%2c %28%24a.length/3%29%29
%7d%7d
Static Methods may not be called
**The above is old. You can call statics easily - aka.
 
%21%21%21 Variables
Variables are case insensitive and case preserving.
 
%7c%24%24 %7c	contains the last token of last line input into the shell%7c
%7c%24%3f %7c	Contains that success/fail status of the last operation%7c
%7c%24%5e %7c	contains the first token of the last line input into the shell%7c
%7c%24DebugPreference	%7cThe action to take when data is written via write-debug in a script or %5bWriteDebug%5d in a cmdlet or provider.%7c
%7c%24ErrorActionPreference	%7cThe action to take when data is written via write-error in a script or %5bWriteError%5d in a cmdlet or provider.%7c
%7c%24HistorySize	%7cNumber of entries saved in the command history.%7c
%7c%24PSCommandPath	%7cThe paths where .cmdlet and .cmdletprovider files may be found.  This is the Windows %5bPowerShell%5d equivalent of the CMD.EXE %24PATH.%7c
%7c%24ReportErrorShowExceptionClass%7cSet to true indicates that the class name of the exception%28s%29 displayed will be shown. Default at internal startup is false.%7c
%7c%24ReportErrorShowInnerException%7c	Set to true indicates that the chain of inner exceptions should be shown.  Each exception message will be indented from the previous message. The display of each exception is governed by the same options as the root exception%2c meaning that the options dictated by %24ReportShowError* will be used to display each exception. Default is false.%7c
%7c%24ReportErrorShowSource%7c	Set to true indicates that the assembly name from whence the exception originated will be displayed. Default at internal startup is true.%7c
%7c%24ReportErrorShowStackTrace	%7cSet to true indicates that the stack trace of the exception will be emitted. Default at internal startup is false.%7c
%7c%24ShouldProcessPolicy%7c	The action to take when %5bShouldProcess%5d is used in a cmdlet.%7c
%7c%24ShouldProcessReturnPolicy%7c	%5bShouldProcess%5d will return this setting%7c
%7c%24StackTrace%7c	The current execution stacktrace - currently%2c this may be overwritten.%7c
%7c%24VerbosePreference%7c	The action to take when data is written via write-verbose in a script or %5bWriteVerbose%5d in a cmdlet or provider.%7c
%7c%24_%7c	The current pipeline object%2c used in script blocks and where%7c
%7c%24Args %7c	Used in creating functions that require parameters%7c
%7c%24Error %7c	Objects which had an error occur while processing that object in a cmdlet.%7c
%7c%24foreach%7c	Reference to the enumerator in a foreach loop%7c
%7c%24Home%7c	The users home directory%3b set to %25HOMEDRIVE%25%5c%25HOMEPATH%25%7c
%7c%24Input%7c	Can aid in code blocks that are in the middle of a pipeline%2c %28see code block%29%7c
%7c%24PSHome%7c	The install location of Windows PowerShell%7c
%7c%24Host%7c	Information about the current executing host%7c
%7c%24OFS%7c	Output Field Separator%7c
%7c%24StackTrace %7c	contains detailed stack trace information about the last error%7c
 
%21%21%21 Object Properties
An object’s properties can be referenced directly with the %22.%22 operator.
%7b%7b
  %24a %3d get-date
  %24a.Date
  %5b%24a.TimeOfDay.Hours%5d
%7d%7d
 
%21%21%21 Operator Precedence
Operators are evaluated in the following precedence%3a  
%28%29 %7b%7d%2c @ 
%22%22%24%2c %21%2c %5b %5d%2c .%2c %26%2c %2b%2b --%2c Unary %2b -%2c * / %25%2c Binary %2b -%2c Comparison %22%22
%22%22Operators%2c -and –or%2c %7c%2c %3e %3e%3e%2c %3d%22%22
 
%21%21%21 Redirection
The %3e and %3e%3e operators redirect command output to files.  The %3e operator creates a new file or truncates and existing one%2c while the %3e%3e operator appends to an existing file.  Example%3a
%7b%7b
  1%2c2%2c3 %3efoo.txt
  5%2c6 %3e%3efoo.txt
%7d%7d
%21%21%21 return %28scripting%29
The return command exits the current script or function and returns a value.  Example%3a
%7b%7b
  function foo %7b
    ...
  %7d
%7d%7d
 
%21%21%21 Script Blocks
Commands and expressions can be stored in a script block object and executed later.  Example%3a
%7b%7b
  %24block %3d %7bget-process%3b %24a%3d1%7d
  %26%24block
%7d%7d
 
%21%21%21 Scripts
Windows %5bPowerShell%5d commands can be stored in and executed from script files.  The file extension for scripts is %22.ps1%22.  Parameters can be passed to a script and a script can return a value.  
Example%3a
%7b%7b
  %24sum %3d %5bMyAdder.ps1%5d 1 2 3
%7d%7d
 
%21%21%21 Strings and String Operators
String constants%3a
%7b%7b
  %22this is a string%2c this %24variable is expanded%22
  ‘this is a string%2c this %24variable is not expanded’
%7d%7d
String operators
%7c%2b	%7cConcatenate two strings%7c
%7c*	%7cRepeat a string some number of times%7c
%7c-f	%7cFormat a string%7c
%7c-replace	%7creplace elements in a string%7c
Examples%3a
%7b%7b
  PS%3e  %22test%22 %2b %22this%22
  testthis
  PS%3e  %22%7b0%3aM%7d%22 -f %24%28get-date%29
  June 02
  PS%3e %24a %3d 1%2c2%2c3%2c4
  PS%3e %24a
  1
  2
  3
  4
  PS%3e %24OFS %3d %22%3a%22
  PS%3e %22%24a%22
  1%3a2%3a3%3a4
  PS%3e %22This is a test%22 -replace %22is%22%2c%22IS%22
  ThIS IS a test
%7d%7d
 
%21%21%21 Switch
%7b%7b
  %24a %3d 3
  switch %28%24a%29
  %7b
    1 %7b%22got one%22%7d
    2 %7b%22got two%22%7d
    3 %7b%22got three%22%7d
  %7d
%7d%7d
 
%7b%7b
  %24var %3d %22word2%22
  switch -regex %28%24var%29
  %7b
    %22word2%22  %7b%22Multi-match Exact %22 %2b %24_ %7d
    %22word.*%22 %7b%22Multi-match Exact1 %22 %2b %24_ %7d
    default  %7b%22Multi-match Default %22 %2b %24_%3b break%7d
    %22w.*%22	 %7b%22Previous Break terminated the matching%22%7d
  %7d
%7d%7d
 
%7b%7b
  %24var %3d %22word1%22%2c%22word2%22%2c%22word3%22
  switch -regex %28%24var%29
  %7b
    %22word1%22  %7b%22Multi-match Exact %22 %2b %24_ %3b continue%7d
    %22word2%22  %7b%22Multi-match Exact %22 %2b %24_ %3b continue%7d
    default  %7b%22Multi-match Default %22 %2b %24_%3b continue%7d
  %7d
%7d%7d
 
%21%21%21 Trap
Execute a block of code in a terminating error condition.  Example%3a
%7b%7b
  function handler1 %7b write-host %22Hi%2c I%27m a trap handler%22 %7d
  function handler2 %7b write-host %22Hi%2c I%27m a trap handler2%22 %7d
  trap %5bSystem.Management.Automation.ExecutionFailedException%5d
  %7b handler2 %3b continue %7d
  trap %5bSystem.Management.Automation.ExecutionBreakOnErrorException%5d
  %7b handler1 %3b continue %7d
  get-content thisisabadfilename -errorp notifystop
  set-location thisisabadlocation
%7d%7d
 
%21%21%21 Unary Operators
%7c%22%22%2b%2b%22%22%7cIncrement a variable%7c
%7c--%7cDecrement a variable%7c
%7c%2b%7cIndicate that a number is positive%7c
%7c-%7cIndicate that a number is negative%7c
%7c%22%22%5btype%5dobject%22%22 %7ccast object to type%7c
%7b%7b
  @%24a %3d %5bint%5d%223%22@
  @%24a %2b 3@
  @6@
%7d%7d
 
%21%21%21 Variables
Format%3a %24%5bscope%3a%5dname
Examples%3a
%7b%7b
  %24a %3d 1
  %24global%3aa %3d 1
  %24local%3aa %3d 1
  %24env%3apath %3d %22d%3a%5cwindows%22
%7d%7d
Scope may be either global%2c local or script
%21%21%21 while %28scripting%29
%7b%7b
  %5b%3alabel%5d while %28condition%29
  %7b
  …
  %7d
%7d%7d

windowspowershellquickstart

QUICK START

Arithmetic Operators (also see Unary and String operators)

Array Comparison

Other operators: ""-gt, -le, -ge""

Arrays

Assignment Operators

Associative Arrays (Hashtables)

Boolean Values

break (scripting)

Command Expansion Operators

Comments

Comparison Operators

continue (scripting)

Dot Sourcing

Escape Character and Escape Sequences

Execution Order

for (scripting)

foreach (scripting)

functions (scripting)

Filters (scripting)

if/elseif/else (scripting)

Invoke Operator

Logical Operators

Method Calls

Variables

Object Properties

Operator Precedence

Redirection

return (scripting)

Script Blocks

Scripts

Strings and String Operators

Switch

Trap

Unary Operators

Variables

while (scripting)