Tech Off Thread

4 posts

Forum Read Only

This forum has been made read only by the site admins. No new threads or comments can be added.

Controlling the Windows Routing table

Back to Forum: Tech Off
  • User profile image
    Shining Arcanine

    I am running Windows XP on a system that has two wireless network interfaces. I need to configure it so that all packets go over interface X with the exception of packets going to/from address a.b.c.d, which must go over interface Y. I have tried "route delete *" to wipe the table clean, but Windows appears to be protecting local network entries because the only entries it removes are the catchall 0.0.0.0 entries. I want to effectively wipe the table and specify precisely what goes out via these two network adapters.

     

    Is there anyway that I can do this?

  • User profile image
    DCMonkey

    route -f ?

  • User profile image
    Shining​Arcanine

    DCMonkey said:

    route -f ?

    Sadly, that does not remove all of the routes. Here is the routing table after route -f:
    C:\Documents and Settings\Richard>route print
    ===========================================================================
    Interface List
    0x1 ........................... MS TCP Loopback interface
    0x2 ...00 15 c5 37 fe 6d ...... Broadcom 440x 10/100 Integrated Controller - Pac
    ket Scheduler Miniport
    0x80005 ...00 13 02 55 06 e5 ...... Intel(R) PRO/Wireless 3945ABG Network Connec
    tion - Packet Scheduler Miniport
    0x90003 ...00 26 f2 b9 90 64 ...... NETGEAR WG111v3 Wireless-G USB Adapter #2 -
    Packet Scheduler Miniport
    ===========================================================================
    ===========================================================================
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
            127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1
          192.168.1.0    255.255.255.0      192.168.1.4     192.168.1.4       25
          192.168.1.0    255.255.255.0      192.168.1.5     192.168.1.5       25
          192.168.1.4  255.255.255.255        127.0.0.1       127.0.0.1       25
          192.168.1.5  255.255.255.255        127.0.0.1       127.0.0.1       25
        192.168.1.255  255.255.255.255      192.168.1.4     192.168.1.4       25
        192.168.1.255  255.255.255.255      192.168.1.5     192.168.1.5       25
            224.0.0.0        240.0.0.0      192.168.1.4     192.168.1.4       25
            224.0.0.0        240.0.0.0      192.168.1.5     192.168.1.5       25
      255.255.255.255  255.255.255.255      192.168.1.4     192.168.1.4       1
      255.255.255.255  255.255.255.255      192.168.1.4               2       1
      255.255.255.255  255.255.255.255      192.168.1.5     192.168.1.5       1
    ===========================================================================
    Persistent Routes:
      None

  • User profile image
    cheong

    You may give ICS a try... I somehow remember that it'll wipe the routing settings clean before writing it's own set of settings...

    Recent Achievement unlocked: Code Avenger Tier 4/6: You see dead program. A lot!
    Last modified

Conversation locked

This conversation has been locked by the site admins. No new comments can be made.