3D Scanner, with a little help from some LEGOs, a wiper motor and the Kinect


How can you go wrong combining LEGOs, a wiper motor, off the shelf software, 3d scanning, 3d printing and the Kinect?

Kinect + Wiper Motor + LEGO = 3D Scanner

Christopher] from the Bamberg Germany hackerspace, [Backspace], wrote in to tell us about one of the group’s most recent projects. It’s a Kinect-based 3D scanner (translated) that has been made mostly from parts lying around the shop.

There are 2 main components to the hardware-side of this build; the Kinect Stand and the Rotating Platform. The Kinect sits atop a platform made from LEGO pieces. This platform rides up and down an extruded aluminum rail, powered by an old windshield wiper motor.

The Rotating Platform went through a couple of iterations. The first was an un-powered platform supported by 5 roller blade wheels. The lack of automatic rotation didn’t work out so well for scanning so out came another windshield wiper motor which was strapped to an old office chair with the seat replaced by a piece of MDF. This setup may not be the best for the acrophobic, but the scan results speak for themselves.

[Christopher] also shares the software workflow that the group uses to complete the 3D scans and print the models; Skanect for scanning, Meshlab and Meshmixer for editing the model and KISSslicer to generate the g-code for the 3D Printer.

Project Information URL: http://hackaday.com/2014/03/09/kinect-wiper-motor-lego-3d-scanner/ -> https://www.hackerspace-bamberg.de/3dme



The Discussion

Conversation locked

This conversation has been locked by the site admins. No new comments can be made.