Holographic Studio with RoomAlive
Roland Smeenk is back (Hiding the Kinect v2) with a look at one of the coolest Kinect projects the RoomAlive Toolkit...
With the current wave of new Augmented Reality devices like Microsoft HoloLens and Meta Glasses the demand for holographic content is rising. Capturing a holographic scene can be done with 3D depth cameras like Microsoft Kinect or the Intel RealSense. When combining multiple 3D cameras a subject can be captured from different sides. One challenge for achieving this is the calibration of multiple 3D cameras so their recorded geometry can be aligned. In this article I will show you how I used RoomAlive Toolkit to calibrate two Kinects. The resulting calibration is used for rendering a live 3D scene. The source code for this application is available on GitHub.
Calibration with RoomAlive Toolkit
Calibration of multiple Kinects typically requires a manual process of recording a collection of calibration points. With RoomAlive Toolkit it is possible to automatically calibrate multiple projectors and Kinects. Since projectors are used to connect multiple Kinects during calibration a minimum of one projector is required. The only requirement is that the Kinects used can see a fair amount of the projected calibration images. When the calibration is done the projector is no longer needed.
Collecting data from multiple Kinects
Since each Kinect V2 needs to be attached to a separate PC we need a way to collect the depth and color data on the main system. RoomAlive Toolkit also contains a networking solution for doing that. Each system runs a KinectServer WCF service that provides the raw Kinect color and depth data. All data is updated ...
Rendering live Kinect data
The simplest form of rendering is rendering the raw pieces of geometry of each Kinect. RoomAlive Toolkit contains a SharpDX based example that shows how to do this. It also shows how to filter the depth and how to apply lens distortion correction. Using this information I built a new application based on SharpDX Toolkit (XNA-like layer) to do the rendering. The application contains ....
Project Information URL: http://smeenk.com/build-your-own-holographic-studio/
Project Source URL: https://github.com/rolandsmeenk/HolographicStudio
This conversation has been locked by the site admins. No new comments can be made.